Outdated entry in the DNS cache

I always experience this error during the remote desktop connection and the great reason behind this Outdated entry in the DNS cache is most often due to "The Remote Desktop Initiator, Does Not Restarted computer since so long". I am writing this to help you people with easy solution. Once you tried Remote Desktop which is obviously working for someone else but you are getting this error;

The connection cannot be completed because the remote computer that was reached is not the one you specified. This could be caused by an outdated entry in the DNS cache. Try using the IP address of the computer instead of the name.

Outdated entry in the DNS cache

This error also can be seen in below screenshot because I want to make it clear that you are facing this exactly the same issue, which I am talking about. Please have a review on below image;

Outdated DNS Cache Error

Before you proceed to solve the issue, I think being a good IT Professional or even the best end user, you must first make sure the "prerequisites" before struggling with solutions available over the internet. Please check these before solutions;

If both Computers are on the same Network, Please make sure that Clock (Yes) is correct on both network nodes (client machine , the remote machine)
The Remote Desktop Computer , Target Computer is Power UP and Running. If possible, please double check with someone else;
Client Computer (the Remote Desktop Initiator) must make sure that his computer is recently updated with DNS Server.

Solutions:

If you consider your self and IT Professional, you need to make sure that your DNS settings are pointing to Internal DNS Server.
You need to flush DNS Cache on the client computer, where you are facing the issue. For this, you can use ipconfig /flushdns command in CMD with Administrator.
Once you are able to flush DNS cache, just register the DNS Server again with ipconfig /registerdns in CMD with Administrator.
Sometimes, deleting the object from DNS Server also helps but, its highly depends on the scenarios.
If you face any kind of issue while using these commands, simply go for the master trick "Restart your Computer" and check the issue again.

ipconfig /registerdns The requested operation requires elevation.

Some of you, might face that when you try ipconfig /registerdns command is not working and you might be facing this error,

ipconfig /registerdns
The requested operation requires elevation.

To solve this issue, please Type CMD in Start Menu and before clicking it to open, just right click on command prompt and run as administrator. Then type again ipconfig /registerdns and this will work perfectly. You are expert Now !

This Blog Post is moved on my Website, Outdated Entry in the DNS Cache Error

Comments

Setting up per connection Limit Bandwidth on MikroTik Router

Generally, I do not prefer to add any unwanted restriction on the network user until its required due to some Administration reason. I know, there are more ways to tackle this setting up per connection Limit Bandwidth on MikroTik Router question comes into one’s mind but I resolve my concern while using MikroTik PCQs feature in MikroTik Queue Type and then calling this Queue Type to Simple Queue. There are more options for setting up per connection Limit Bandwidth on MikroTik Router but please share your concern to add anything else in this article. Let’s start to add our configurations; I am using WinBox for this Article but you can use anything you are convenient to use. Let’s start Step by Step procedure for Setting up per connection Limit Bandwidth on MikroTik Router, any version. Setup Queue Types After Successful Login, click on Queues menu. Navigate to Queue Types and Press Add + (Plus Sign) to add a new Queue Type. Type a Name like in my scenario,...

You have been logged on with a temporary profile - Windows 7

You have been logged on with a temporary profile. “You cannot access your files and files created in this profile will be deleted when you log off. To fix this, log off and try logging on later. Please see the event log for details or contact your system administrator.” I am an I.T Professional since 2006, I encounter this error in Windows XP, then in Vista and now in Windows 7 as well, “ I think this is a Windows Family Problem ”. Time changed, Microsoft Windows changes a lot in themes and off-course in other technical, performance and security aspects as well but this error is not fixed. From time to Time, We (I.T Professionals) works to fix this error, these are the common practices that we can do for this error. · Restart Your Computer , hopefully, you will be able to get your OLD profile back in normal and same working condition. · Corrupted Profile , Logon with ...

The file is corrupt and cannot be opened" - error in Microsoft Office 2010

Mostly we have seen this error with email attachments, when a user gets an email in his / her inbox having, Microsoft Word, Microsoft Excel or Microsoft PowerPoint file in some older version. This error is not Microsoft Office bug, as so many blogs says but it is your security settings that are preventing Internet E-mail attachments to being opened at your computer. Secondly, this error comes to Lucky person J not everyone gets this error. Quick Fix , Open your Microsoft Word 2010, Microsoft Excel 2010 or Microsoft PowerPoint 2010 and try as under; 1. Open Microsoft Word, Excel or PowerPoint 2010. 2. Click on File > Options. 3. Select Trust Center > Trust center settings. 4. Select Protected view. 5. Uncheck “Enable Protected View for files originating from the Internet” under Protected View > OK. 6. Restart Microsoft Word / Excel or PowerPoint 2010 and try to open document. If you are unable to open your document with only this desel...

Rizwan Ranjha

Search This Blog