Skip to main content

How to Add / Assign IP Address to Ethernet1 on MikroTik RouterOS CLI

By
MikroTik Router is a great Freeware OS for PC and they also Provide RouterBOARD as a hardware router. I am not going to tell the details about the products as these can be find on the vendor website but here is the very little tutorial about “How to add or assign IP Address to MikroTik RouterOS” and you will be surely feel great as its quite simple.

Note:
  1. Every router is factory pre-configured with IP address 192.168.88.1/24 on ether1 port. Default username is admin with empty password.
  2. If your device has a graphics card (i.e. regular PC) simply attach a monitor to the video card connector of the computer (note: RouterBOARD products don't have this) and see what happens on the screen. You should see a login prompt like this: http://wiki.mikrotik.com/wiki/Manual:First_time_startup#Monitor_and_Keyboard

I am assuming that you are already login on MikroTik RouterOS and here is the command that you need to enter on your CLI.

[admin@MikroTik] > ip address add address=192.168.56.101/24 interface=ether1

 Just enter above command and hit enter, you have done. please show your self in comments to improve this. Thanks

I registered a website with my name RizwanRanjha. You can read this here as well Configure IP on MikroTik RouterOS CLI

Labels:

Comments

Post a Comment

Popular posts from this blog

Setting up per connection Limit Bandwidth on MikroTik Router

By
Generally, I do not prefer to add any unwanted restriction on the network user until its required due to some Administration reason. I know, there are more ways to tackle this setting up per connection Limit Bandwidth on MikroTik Router question comes into one’s mind but I resolve my concern while using MikroTik PCQs feature in MikroTik Queue Type and then calling this Queue Type to Simple Queue. There are more options for setting up per connection Limit Bandwidth on MikroTik Router but please share your concern to add anything else in this article. Let’s start to add our configurations; I am using WinBox for this Article but you can use anything you are convenient to use. Let’s start Step by Step procedure for Setting up per connection Limit Bandwidth on MikroTik Router, any version.  Setup Queue Types After Successful Login, click on Queues menu. Navigate to Queue Types and Press Add + (Plus Sign) to add a new Queue Type. Type a Name like in my scenario,...
Post a Comment
Read more

DsReplicaGetInfo failed with status 8453 0x2105 on Windows Server 2008

By
I have two Domain Controller in my envorinment, Primary Domain Controller is Windows Server 2003 based and Additional domain controller is Windows Server 2008 based. When I Installed New 2008 ADC and after some time, when I check with repadmin /showreps found the error.... DsReplicaGetInfo() failed with status 8453 (0x2105):Replication access was denied. I really worried about Solutions: [ DsReplicaGetInfo failed with status 8453 ]
1 comment
Read more

Event ID 1202 Source SceCli on domain controller - Solved

By
I was getting rapidly Event ID 1202 Source SceCli on my domain controller. Security policies were propagated with warning. 0x4b8: An extended error has occurred. Advanced help for this problem is available on http://support.microsoft.com. Query for "troubleshooting 1202 events". – Event ID 1202 Source SceCli It was a newly build Windows Server 2012 Domain Controller. I have scenario like this; Before: Primary Domain Controller: Windows Server 2003 (32-bit) Secondary Domain Controller: Windows Server 2008 (32-bit) Now: Primary Domain Controller: Windows Server 2012 Secondary Domain Controller: Windows Server 2008 (32-bit) After successfully DC promotion and after a week, I start getting Event ID 1202 on newly build server. L I tried various solutions but nothing was great except the below one; Solution ( Caution ):  Start > Type CMD > Run As Administrator (Open it on Windows Server 2012: Domain Controller)  Type   dcgpofix /ignoresche...
Post a Comment
Read more